Alarm Level

This attribute is used to filter on the alarm (sound) levels.

Alarm Priority Category

This attribute is used to filter on the point's alarm priority category.

Alarm Priority Category Bit 1-3 Set

These attributes are used to filter on whether the Alarm Priority Category Bits 1-3 are set.

Alternate Units

This attribute is used to filter on the point’s alternate units.

Alternate Value

This attribute is used to filter on the point’s alternate value.

Config Bit 1-15 Set

These attributes are used to filter on whether the Configurable Bits 1-15 are set.

External Value state set

This attribute is used to filter on whether the point's External Value state is set.

Inited state set

This attribute is used to filter on whether the point's Inited state is set.

Is Alarm Suppressed

This attribute is used to filter on whether the alarm is suppressed.

Notification Configurable Bit Calc Parm 1

This attribute is used to filter on the alarm to which the notification maps. Notification Configurable Bit Calc Parm 1 is relative to the Configurable Bit that is causing the alarm to occur.

Notification Configurable Bit Calc Parm 1 Description

This attribute is used to filter on the description for Notification Configurable Bit Calc Parm 1.

Notification Configurable Bit Calc Parm 2

This attribute is used to filter on the alarm to which the notification maps. Notification Configurable Bit Calc Parm 2 is relative to the Configurable Bit that is causing the alarm to occur.

Notification Configurable Bit Calc Parm 2 Description

This attribute is used to filter on the description for Notification Configurable Bit Calc Parm 2.

Notification Configurable Bit Enabled

This attribute is used to filter on whether the Notification Configurable Bit is enabled.

Notification Configurable Bit GNS ID

This attribute is used to filter whether Notification Configurable Bit GNS ID is set.

Notification Configurable Bit Name

This attribute is used to filter on the name of the Configurable Bit that initiated the notification.

Notification Configurable Bit Report GNS

This attribute is used to filter whether the Report GNS Notification Configurable Bit is set.

Notification Configurable Bit Reporting Delay

This attribute is used to filter whether the Reporting Delay Notification Configurable Bit is set.

Point Digital or Analog bit set

This attribute is used to filter whether the DIGITAL_ANALOG Bit is set.

Point String or Enum bit set

This attribute is used to filter whether the STRING_ENUM Bit is set.

Point type is Input

This attribute is used to filter whether the point type is an input point type.

Primary Units

This attribute is used to filter on the point’s primary units.

Primary Value

This attribute is used to filter on the point’s primary value.

Scheme Bit 1-4 Set

This attribute is used to filter whether Scheme Bit 1-4 is set.

Time

Unreliable Value

This attribute is used to filter on whether the point's Unreliable bit is set.

Updated State Set

This attribute is used to filter on whether the point's Updated bit is set.

User Bit 1-16 Set

These attributes are used to filter on whether the User Bits 1-15 are set.

Value

This attribute is used to filter on the point’s value.

Expiration time

This attribute is used to filter on the notification's expiration time.

Time in seconds remaining

This attribute is used to filter on the notification's remaining time in seconds before timeout.